jf24d-pa.cktxcx.rar

无线模块JF24D中寄存器0组与寄存器1组怎么定义啊？还有通道是怎么回事啊？
/*********************寄存器组1初始值**********************************/
code UINT32 RegArrFSKAnalog[]={
0xF2014B41,
0x30064BC0,
0x00C4FCA0,
0x60350017,
0x0B009941, // 0B109941 for 2 Mbps mode
0xBE7F0124,
0x00400000,
0x00000000,
0x00000000,
0x00000000,
0xF64EF5F6,
0x5C1851D6,
0x4055002D,
0x00700000 // 00040000 for 2 Mbps mode
};

code UINT8 RegArrFSKAnalogReg14[]=
{
0x41,0x10,0x08,0x82,0x40,0x10,0x08,0xF2,0x7C,0xEF,0xCF
};

/**************************寄存器组0初始值********************/
code UINT8 RegArrFSK[][2]={
{0,0x0F},
{1,0x3F},
{2,0x3F},
{3,0x03},
{4,0xff},
{5,0x17},
{6,0x17},
{7,0x07},
{8,0x00},
{9,0x00},
{12,0xc3},
{13,0xc4},
{14,0xc5},
{15,0xc6},
{17,0x20},
{18,0x20},
{19,0x20},
{20,0x20},
{21,0x20},
{22,0x20},
{23,0x00},
{28,0x3F},
{29,0x07}
};
/***********************定义通道地址********************************/
code uchar TX_PIPE0[]={0x12,0x34,0x56,0x78,0x01};
code uchar TX_PIPE1[]={0xc2,0x56,0x34,0x12,0x02};
code uchar TX_PIPE2[]={0xc3,0x56,0x34,0x12,0x02};
code uchar TX_PIPE3[]={0xc4,0x56,0x34,0x12,0x02};
code uchar TX_PIPE4[]={0xc5,0x56,0x34,0x12,0x02};
code uchar TX_PIPE5[]={0xc6,0x56,0x34,0x12,0x02};

附上jf24d规格书和编程指南自己研究下吧

谢谢发的资料，但是都不详细啊《我需要一些关于寄存器组与通道有关的资料，求帮助！！如果可以，可以加QQ：2216054168