在Keil uVision3中定义了一个结构体类型

typedef struct SYSTEMTIME //typedef: 用 SYSTEMTIME来代替 struct
{
unsigned char Second;
unsigned char Minute;
unsigned char Hour;
unsigned char Week;
unsigned char Day;
unsigned char Month;
unsigned char Year;
unsigned char DateString[11];
unsigned char TimeString[9];
}SYSTEMTIME; //定义的时间类型 SYSTEMTIME显示不是变量而是类型
SYSTEMTIME CurrentTime;
void DS1302_GetTime(SYSTEMTIME *Time) //获取时钟芯片的时钟数据到自定义的结构型数组
{
unsigned char ReadValue;
ReadValue = Read1302(DS1302_SECOND);
Time->Second = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F); //取秒值的十位和各位相加保存到（*Time).Second中
ReadValue = Read1302(DS1302_MINUTE);
Time->Minute = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
ReadValue = Read1302(DS1302_HOUR);
Time->Hour = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
ReadValue = Read1302(DS1302_DAY);
Time->Day = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
ReadValue = Read1302(DS1302_WEEK);
Time->Week = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
ReadValue = Read1302(DS1302_MONTH);
Time->Month = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
ReadValue = Read1302(DS1302_YEAR);
Time->Year = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
}


注意：

程序没有完全，当执行了Time->Second = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);这条指令后，我将秒的十位和个位加起来存放在（*Time）.Second中
请问个位大虾，在Keil uVision3中我要如何才能查看（*Time）.Second中的内容，这个数据是在Keil uVision3软件中哪个地方可以查看的