找回密码
 注册会员
更新自动建库工具PCB Footprint Expert 2024.04 Pro / Library Expert 破解版

[音频电路] 22W音频放大器电路(22Waudioamplifier)

[复制链接]
admin 发表于 2013-1-4 02:51:21 | 显示全部楼层 |阅读模式

本文包含原理图、PCB、源代码、封装库、中英文PDF等资源

您需要 登录 才可以下载或查看,没有账号?注册会员

×
W音频放大器电路 (22W audio amplifier)
  The 22 watt amp is easy to build, and very inexpensive. The circuit can be used as a booster in a car audio system, an amp for satellite speakers in a surround sound or home theater system, or as an amp for computer speakers. The circuit is quite compact and uses border=0>
  Parts
  Part Total Qty. Description
  R1 1 39K 1/4 Watt Resistor
  C1,C2 2 10uf 25V Electrolytic Capacitor
  C3 1 100uf 25V Electrolytic Capacitor
  C4 1 47uf 25V Electrolytic Capacitor
  C5 1 0.1uf 25V Ceramic Capacitor
  C6 1 2200uf 25V Electrolytic Capacitor
  U1 1 TDA1554 Two Channel Audio Amp Chip
  MISC 1 Heatsink For U1, Binding Posts (For Output), RCA Jacks (For Input), Wire, Board
  Notes
  1. The circuit works best with 4 ohm speakers, but 8 ohm units will do.
  2. The circuit dissipates roughly 28 watts of heat, so a good heatsink is necessary. The chip should run cool enough to touch with the proper heatsink installed.
  3. The circuit operates at 12 Volts at about 5 Amps at full volume. Lower volumes use less current, and therefore produce less heat.
  4. Printed circuit board is preferred, but universal solder or perf board will do. Keep lead length short.
*滑块验证:
您需要登录后才可以回帖 登录 | 注册会员

本版积分规则

QQ|手机版|MCU资讯论坛 ( 京ICP备18035221号-2 )|网站地图

GMT+8, 2024-12-24 08:45 , Processed in 0.059288 second(s), 10 queries , Redis On.

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表