[求助]仿真出现的错误的问题

在用protel99se画PCB原理图时运行 simulate->run时，产生了好多的错误，错误如下，不知道哪位牛人能
给出解答啊~~~~！！！！！！
C1 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
C1 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
C1 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
C2 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
C2 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
C2 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
C3 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
C3 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
C3 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
C4 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
C4 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
C4 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
还有个问题：
如果这个运行成功了能够自动的SPICE仿真吗？
[此贴子已经被作者于2007-5-16 18:43:11编辑过]